Lightning Protection
for all network-enabled devices
Item no.: 20200001
Flashtrap Lightning Protection
Lightning protection for DIN rail mountingSimple plug-and-play installation
Grounding is provided by the top-hat rail
No complicated configuration
Simply plugs in between the network connection and the device to be protected
Thanks to its wide operating temperature range, the device can be installed in harsh environments without any problems.
Category: E-Systems, Knock Detection Systems
Brand: ENSERV
Technical data
| Network Connection | 2x RJ45 10/100/1000 Mbps |
|---|---|
| PoE Capability | IEEE 802.3af, at, LTPoE++ up to 50W |
| Deduction Capacity | 10 kA (8/20 ps), 100 A (10/1000 px) |
| Ignition voltage | 90 VDC t20% (pair to ground), < 450 V (at 100 V/ps), < 600 V (at 1 kV/ps) |
| Differential Clamping | <15 V, < 5 ns, 30 Apk (pair to wire) |
| Differential Capacity | < 4.0 pF |
| shielded conductors | (Pins) 1–8 (on an 8-pin modular connector) |
| Certification Mark | IEEE 802.3, CAT 5, 6 |
| ESD Protection | IEC 61000-4-2, Clause 4 (10 kV CD) |
| Housing | Metal enclosure with clamp for TS35 DIN rail |
| Dimensions | 82 x 25 x 32 mm |
| Weight | 205 g |
| Surroundings | Operating temperature: -15 to +70°C Operating humidity: 10% to 95% (non-condensing) |
| Labeling | CE, RoHS |
